Waterlox Turns a Wisconsin Bungalow Into a Home

When Britt and her boyfriend Brian purchased a beautiful 1929 bungalow in Madison, Wisconsin a few years ago, they discovered a treasure. Not literally a treasure in monetary terms but they found that the home’s attic was ideal for converting into a perfectly spaced upstairs master bedroom.

This space was excellent but it had old pine boards that needed quite a bit of work, as well as other areas of the room that needed work, as well. So the “treasure” needed a “key” to open its beauty and durability – and that came in the form of Waterlox.

Brian said he focused on developing the room overall while pulling out the pine boards to sand them in the basement and work on them outdoors the following summer.

“We had to have a lot of structural work done so we carefully pried up each board, pulled nails, and stored in the basement and in the spring we sanded down, stored again and then when we were ready, we nailed it down, picked a starting point so we knew how much wood we would have left,” Brian said.

But to protect the wood, Brian had a lot of research to do online to find the right product.

“I have friend who has a cabin who used a polyurethane and he talked about how it cracks and yellows but I found Waterlox mentioned quite a lot in forums and everyone kept saying the same thing about them … ‘once you become a user you become an advocate’ and it’s totally true,” he added.

“The product offers an amazing contrast and we could not be happier. It went on really easy – I’ve never finished a floor in my life so I was a little intimidated and maybe a little skeptical but we used it and everything came out beautiful.

“I’m not sure what the species of the pine was but Waterlox really brought out a red hue and it was really nice and I couldn’t have asked for anything better. It brought out the red and a real natural look in the grains and the knots. I’ve already had responses on my Facebook page and a friend is building a house and she’s going to use Waterlox just based on how well it performed for us.”

Why I Use Tung Oil ... By Avi Hadad

           

People often ask me what I use for finishing my floors. My answer is: It depends. It depends on the floor, the clients, the expected use, and the look. I never have and never will stick to only one brand of finish and one product. Much like I would not have all my power tools of the same brand. I pick and choose the best product for the application. In my last post I showed photos of a hand-scraped job being finished with tung oil. So, why do I like tung oil? • Easy to apply. This has always been my first reason for using a product. • I can tint it with stains and dyes. • I can topcoat it with other finishes. • It looks richer than surface-finished. • It is a penetrating oil. • It needs no abrasion between coats. • It does not raise the grain. These are just a few reasons. How are those reasons translate into reality? Here are some examples: On one wide-plank oak job, the owners wanted an old patina look. All I had to do was mix the tung oil with oil-base stains (this is a recommended procedure by the manufacturer). Stains alone would have made the porous areas darker. The other finish manufacturers did not (and still don’t) recommend tinting their finishes. By using the tung oil I achieved the look requested by the customer and was still covered by the manufacturer’s warranty. On another job I did I scraped a walnut floor. After two coats of the oil, I noticed one big spot I was not happy with. I scraped that area again down to bare wood and applied tung oil to it. Now, because it is a penetrating oil the wood sucked that coat pretty fast. And because the oil “melts” onto the prior coat instead of sitting on top of it, a half hour later I applied a third coat over the entire floor with no problem. That’s unheard of with surface finishes. Once surface finishes start to set, you cannot touch them. After the coat dried it was like it never happened. You could not see any issues with that area I touched up. On another job I was just ready to apply the first coat. Then I noticed one plank that seemed a little lighter than the rest of the floor. I tinted some tung oil and colored that plank. Then I applied the coat to the rest of the floor. When I was done, you could not tell the difference. Whatever your choice of finish is for the job, make sure you follow the instructions and test it first. (Sometimes you will follow the instructions and the finish will look horrible, that’s why I said test it first). I have a lot of finishing techniques in my arsenal: dewaxed shellac, oil modified, water base, stains, dyes, glazes, oils, brushing, T-bar, rolling, buffing on and the list goes on. Tung oil is one of many finishes a floor finisher should know. You never know what your next awesome job is going to require, so keep an open mind.

Recapturing That "Victorian Feel" Thanks to Waterlox

Wendy lives in an 1800’s Victorian home that has a great deal of beautiful wood throughout the house. During a recently remodel of the home’s floors, she ran into a few issues that were important to her family.

 

Wendy and her husband have three children and a dog – so safety was of the utmost importance – but so was quality as they really wanted the beauty of the wood to come out once they sanded and finished the wood floors.

 

The best product for the job was Waterlox Original Tung Oil finishes, Wendy said, because it brings out wood’s natural beauty while providing long-lasting protection.

 

“I researched Waterlox and it seemed to be the best product for us,” she said. “It was amazing. It brought out the highlights in the wood, absolutely beautiful. I would recommend this product, and already have to many friends.”

 

To see Wendy’s pictures, click here.

Flooring Feature: "Waterlox Will Be My Highest Recommendation!"

One of our best customers this month is actually one of our newest. Ben contacted us about his decision to install new wood floors in a building rehabilitation project of his – and he wanted the floors to look ‘dramatic.’

 

Ben installed 7” wide walnut flooring from Appalachian Woods who highly recommended using Waterlox Original Tung oil finishes to complete the project. He had only one problem – he had never before used Waterlox!

 

“I got the flooring from Appalachian Woods and they recommended Waterlox Original Tung oil finishes as the best finish for the project,” Ben said. “I've been installing and refinishing hardwood flooring for about seven years now and have never used Waterlox before. Now I tell everyone that Waterlox Original Tung Oil finishes are the best wood floor finishing products that I have ever used!”

 

“I used the Waterlox Original Sealer/Finish for all of the coats I put down. Waterlox Original Tung oil finishes will be my highest recommendation to my customers from here on out!”

 

Great job Ben, the floor looks incredible – another Waterlox success story! Click here to view all of Ben’s pictures.

The Lineberry Cart: A Piece of Americana is Finished by Waterlox

A true piece of Americana, the Lineberry factory cart is considered an authentic antique in most circles. The carts, originally manufactured by the Lineberry Foundry and Machine Company in the early 1900’s in North Carolina, were widely used in factories.

 

Often called railroad carts, Lineberry carts were originally used in railroad depots for transporting trunks, and were later used in furniture factories for moving large pieces from one specialist artisan to the next. Waterlox customer Steve K. decided to rebuild and restore a Lineberry factory cart, using Waterlox to complete the finishing. To read the entire story, click here!

 

 

According the Steve, the finished product is incredible - as you can see from the photos!

 

 

“Most of what I did was all original,” he said. “The wood is all new white oak finished with 5 coats of Waterlox Original Sealer/Finish.” The cart was rebuilt and finished in central Texas where Steve enjoys working with Waterlox as part of his woodworking projects!

Waterlox Continues "Making Music" With Fellow Guitar Makers

There are many applications for the use of Waterlox finishes, from wood floors and countertops to furniture and bathroom and kitchen built-in areas like cabinets and shelves to bowls, boats and more. But some applications seem to bring more music to our ears than others, literally.

 

Dean G. is an experienced musician and guitar maker who has been creating guitars by hand for years. He recently experienced the effect Waterlox can have on a guitar when he used the product to finish a few instruments recently.

 

"I am proud to say I was able to use a sprayer to apply your Waterlox finish on one of my guitar necks and this finish is superb in all aspects," he said. "Waterlox Original Sealer/Finish layers so nicely and it flattens and levels even better. I will continue using your product as a part of my finishing mix on my necks ... Waterlox is amazing, Thank you!"

 

For the use of his guitar necks, Dean finished them with Waterlox Original Sealer/Finish and was nice enough to provide us with some beautiful sample images, click here to view!